Loading... Please wait...

4232 Differential Probe 1:10/100, 25 MHz, 1400V

4232 Differential Probe 1:10/100, 25 MHz, 1400V


Product Description

Differential Probe for Power Management- Model 4232

The 4232 is designed to safely analyze floating signals. The built in amplifier scales and converts the high voltage differential
input to a low, voltage single-ended BNC output, compatible with any oscilloscope. The inputs are useful in
measurements of power semiconductor circuits, robotic drives, NC machines and the latest switching circuits.

-Switching Power Supply Design
-Motor Drive Design
-Electronic Ballast Design
-CRT Display Design

-Up to +/-1400V (DC +Peak AC) Differential
  and Common Mode
-Safety Certified
-Economical cost

Cost Included
-Red & Black Sprung Hooks
-Calibration Certificate
-4ea AA Batteries
-9VDC Adapter

Product image


Optional 4200 Series Accessories

Included with Probe
Product image
Black Storage
9VDC Adapter
included with probe










Model 4232 Specifications

Bandwidth DC to 25 MHz (-3dB)
Attenuation Ratio 1:10/100
Accuracy  +/- 2%
Rise Time 14ns
Input Impedance 4 Mohm//5.5pF each side to ground
Input Voltage
-Differential Range

-Common Mode Range
-Absolute Max. Voltage(Differential or Common Mode)

70 Vrms and +/- 70V(DC + Peak AC)@ 1/10
700 Vrms and +/-700V(DC + Peak AC @ 1/100
700 Vrms and +/-700V(DC + Peak AC)@ 1/10 & 1/100
1000 Vrms and +/-1400V(DC + Peak AC@ 1/10 & 1/100
Output Voltage

-Offset (typical)
-Noise (typical)
-Source Impedance (typical)

+/- 7V( into 50 kohm load)
50 ohm (for using 1 Mohm input system oscilloscope)
CMMR (typical)  -80dB @ 50 Hz, -60dB @ 20kHz
Ambient Operating Temperature -10 to 40 degrees centigrade
Ambient Storage Temperature -30 to 70 degrees centigrade
Ambient Operating Humidity Up to 85% RH
Ambient Storage Humidity Up to 85% RH
Power Requirements* -Standard- 4 x AA Cells, 9VDC/40mA Mains Adapter (Both Included)
-Options- USB Power cord Power leads
Length of BNC Cable 37"
Length of Input Leads 17"
Dimention 7 1/4" x 2 3/4" x 1"
Weight .583 lb
 Plugs 4mm Banana plugs - Use with accessories below

 * a. The supplied voltage must be less than 12V and greater than 4.4V, or the probe could be damaged or will not operate properly.
b. polarity is "+" inside and "V" outside. For wrong polarity, built-in circuit protects the probe, no danger or damage will occur.
c. When the voltage of the cells become too low, the power indicator on the panel will flicker.

Find Similar Products by Category

Vendors Other Products

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Click the button below to add the 4232 Differential Probe 1:10/100, 25 MHz, 1400V to your wish list.