Created with Sketch. Created with Sketch.

SMD Probes & Grippers

The SMD Probe kits are used for high density SMD testing. The sharp probe tip is spring loaded to help keep the probe from slipping off the device under test. The variety of tips available in these kits will insure a positive non-slip connection to any surface.

The SMD Grippers are designed for use with surface mount devices or where connection point is very small.
The insulated shaft allows for simultaneous side by side connections in tight spaces.

 

  • Spring Loaded Oscilloscope Probe PM4913-1

    Spring Loaded Oscilloscope Probe PM4913-1

    Spring Loaded Oscilloscope Probe PM4913-1 This new passive oscilloscope probe has Spring Loaded Needle Sharp Tips that will insure a positive non-slip connection to any surface. The Gold Plated Spring Tip is used for high density SMD testing. The Low...

    $89.00
    Choose Options
  • SMD Spring Tip Micro Probe Made in USA/Probe Master

    9110 SMD Spring Tip Micro Probe Deluxe Kit

    9110 SMD Spring Tip Micro Probe Deluxe Kit The 9110 Surface Mount (SMD) kit is used for high density SMD testing. The sharp probe tip is spring loaded to help keep the probe from slipping off the device under test. Also included are sharp ridged needle...

    $89.50
    Choose Options
  • Spring Loaded SMD  probe tip for DMM Test Leads, Made in USA/Probe Master

    9189 SMD Micro Spring Tip Probe

    9189 SMD Micro Spring Tip Probe The 9189 sharp probe tip is spring loaded to help keep the probe from slipping off the device under test. The 9189 comes with the 8162 Needle tip. Optional spring tips available below. The 9189 fits our 9100 series test...

    $9.25
    Choose Options
  • SMD Spring Loaded Probe Tip

    SMD Spring Loaded Oscilloscope Probe Tip

    SMD Spring Loaded Oscilloscope Probe Tip- P/N 4990SP, 4991SP, 4992SP This spring loaded tip for our oscilloscope probes are used for high density SMD testing. The sharp probe tip is spring loaded to help keep the probe from slipping off the device under...

    $10.25
    Choose Options
  • Spring Loaded Micro-Tip Test Lead Kit

    Spring Loaded Micro-Tip Test Lead Kits - Model 8150 & 8151 Spring Loaded Gold Tips & Contacts This probe is used with Surface Mount and High Density circuits. The 8 tips included in these kits will insure a positive non-slip...

    $39.90
    Choose Options
  • Spring Loaded Micro-Tip Test Lead Set

    Spring Loaded Micro-Tip Test Leads Only

    Spring Loaded Micro-Tip Test Leads Only - 8152 Shown The 8152 Spring loaded test leads are used for high density SMD testing. The sharp probe tip is spring loaded to help keep the probe from slipping off the device under test. Soft Comfortable...

    $25.90
    Choose Options
  • SMD Gripper, 0.8mm To 0.5mm, Long Tip

    8172- SMD Gripper, 0.8mm To 0.5mm, Long Tip

    SMD Grippers - Pair Gold Contacts USED WITH PQFP PACKAGES THIN CLIP BODY WIDTH ALLOWS MANY PQFP CLIPS TO BE MOUNTED SIDE BY SIDE AND SIMULTANEOUSLY TESTED   MAXIMUM FREQUENCY IS 100 MHz FITS .025" WIRE WRAP LEADS 0.8mm TO 0.5mm,...

    $78.00
    Add to Cart
  • SMD Micro Gripper

    8174- SMD Gripper

    8174 SMD Micro Clip The 8174 SMD Micro Clip is designed for use with surface mount devices or where connection point is very small. The insulated shaft allows for simultaneous side by side connections in tight spaces. Part length- 1.911...

    $16.75
    Choose Options
  • SMD Multi Colored Grippers 8175 - SMD Grippers (10 piece kit)

    8175 - SMD Grippers (10 piece kit)

     8175 SMD Micro Gripper- 10 Piece Kit $96.00     INCLUDES 10 MULTI-COLORED GRIPPERS TIP BENDS 30 DEGREES FOR HARD TO REACH SIGNAL PROBING FITS .025" WIRE WRAP LEADS 1.100" LONG TIP   Gripper, 2.54mm to 0.8mm Lead Pitch, (1...

    $96.00
    Add to Cart