9100 Series Accessories

9192 Flexible Back Probe

9192 Flexible Back Probe Flexible Back Probe pins are great for sliding into automotive connectors like fuel injectors or sensors.The flexible tip bends & stays in place at the angle needed to allow easy connection on hard- to- reach connectors...

9189 SMD Micro Spring Tip Probe

9189 SMD Micro Spring Tip Probe The 9189 sharp probe tip is spring loaded to help keep the probe from slipping off the device under test. The 9189 comes with the 8162 Needle tip. Optional spring tips available below. Spring loaded probe tip for...

4218 Sprung Hook

 Sprung Hook Use with 9100 series test leads  & 4200 series Differential Probes 4mm safety socket 1000V/3A CAT III Total Length 4.8 in

9183 Insulated Probe - 10.5"

10.5" Insulated Probe- Fits all 9000 Series Test Leads This 10.5" probe tip is fully insulated for those hard to reach test points.  It connects to our 9100 series 4mm banana plug leads. 1000V, 10AMP Tip Diameter .07" Tip length 9" Total...

Pin & Socket Flexible Adapters

These Flexible adapters fit on the 9100 Series and other standard banana plugs. Model 9181-1 also fits .025" square pins. Pins & Sockets:   Gold PlatedBanana Jack:   Nickel Plated Rating:Insulation: 1000...

4986 Micro Pincer

Micro Pincer Fits .025" Wire Wrap Adapter P/N9168 Fits Wire Wrap Adapter P/N 1209 For IC's with .05" Lead Pitch Models 4986-0 Black Micro Pincer  4986-2 Red Micro Pincer   

4958 Pico Hook

Pico Hook- Fits on .025"  Wire Wrap Adapter P/N 9168 The 4958 Pico Hook connects to our P/N 9168 wire wrap adapter in our 9000 series test leads. Length- 1.41" Connection method- .025" Sq. Pin or .030" sockets Current (max. Rec.)- 1.0...

4956 Pincer Hook

Pincer Hook- Fits on .025"  Wire Wrap Adapter P/N 9168 Length- 2.25" Max Hook Diameter- .030" Connection method- two .025 sq. pin Models: 4956-0 Black Pincer Hook 4956-2  Red Pincer Hook

9187 Fused Probe 1000V

Fused Probe - Fits all 9100 Series Test Leads This fused probe is fitted with a 500mA/1000V Fuse. The fuse is always held captive in the front section for added safety with a  probe tip on one end and a Female Banana Jack on the other end. Overall...

9186 SMD Needle Probe .030 Dia

SMD Needle Probe .030 Dia- Fits all 9100 Series Test Leads The 9186 SMD Needle Probe  is capable of piercing conformal coatings and the very sharp tips also help keep the probe from slipping off your test point. The banana jack end connects to our...

9169 Sprung Hook Probe

Sprung Hook Probe- Fits all 9100 Series Test leads CAT III  1000V, CAT IV 600V, 10A Models 9169-0 Black Sprung Hook Probe 9169-2 Red Sprung Hook Probe   Compatible Test Leads Fits our 9100 Series Test Leads and...

9168 .025" Female Wire Wrap Socket 6" Wire

.025" Female Wire Wrap 6" Wire - Fits all 9100 Series Test Leads The 9168 has a 4mm jack that plugs into our 9100 Series test leads. With the standard socket you can plug many test clips that have the .025" pin. Length 6" 4mm Female connector...

9167 Piercing Hook 3" Wire

Piercing Hook 3" Wire - Fits all 9100 Series Test Leads   Piercing hook with 3" wire Plugs onto the 9100 series leads or other 4mm banana plugs For use with 16 AWG through 23 AWG wire Models 9167-0 Black Piercing Hook 3"...

9165 Pincer Hook 3" Wire

Pincer Hook 3" Wire - Fits all 9100 Series Test Leads   The 9165 Pincer Hook has a banana jack connector that fits the 9100 series test leads with 3 " flexible 20 awg wire to pincer hook.   Models 9165-0 Black Pincer Hook 3"...

9164 Sprung Hook 3" Wire

Sprung Hook 3" Wire - Fits all 9100 Series Test Leads   The 9164 Sprung Hook has a banana jack connector that fits the 9100 series test leads with 3 " flexible 20 awg wire to sprung hook. Models 9164-0   Black Sprung...

9163 5 Way Phone Clip, Bed of Nails

5 Way Phone Clip 3 " Wire- Fits all 9100 Series Test Leads The 9163 Phone Clip has a banana jack connector that fits the 9100 series test leads with 3 " flexible 18 awg wire to 5 way Phone Clip. Models  9163-0 Black 5 Way Phone...