Product Description
3436 Design Your Own Test Leads
Select the connectors you need on each end and the cable length
and we will make the leads for you.
All connectors are permanently attached to the cable here at our facility.
Made in USA- Probe Master
Specifications-
- 18GA Silicone Leads
- 1000V
- 10 AMP Rated
5 easy steps to design your own Test leads
Step 1- Select 1st Connector (A,B,C,D,E,F,G,H,I or J)
Step 2- Select 2nd Connector (A,B,C,D,E,F,G,H,I or J)
* If you need Alligator Clips on both ends (12" to 36") go to 3451 Alligator to Alligator
Step 3- Select Length Available in 24" (inch), 36", 48" ,60", 72", 96", 120", 180", 240" and 300" lengths
Step 4- Select Color Available in Red , Black , (Yellow, Green & Blue cable available with Black Connectors only )
Step 5- Enter Your Selections in the Drop-Downs at top of page
Product Videos
Custom Field
Product Reviews
16 Reviews Hide Reviews Show Reviews
-
very Quick lead time.
They were assembled and shipped same day which I was quite surprised by. Only issue I have which may have been my own fault for not noticing is the 4mm safety female plug does not work with my fluke current clamp or current fluke test leads. There is not enough room around the insulation for the insulation of the current clamp plugs or test lead plugs to slide inside it. I had to cut off the insulation to make these work. I’m using these as extenders so I can do current testing from 20 feet away so I will likely never use them with any high voltage levels that would be a concern for the removed insulation.
-
Great for modular attachments
I have a great set of Probemaster modular leads with a ton of attachments, but these don't work with my Simpson meter due to its oddball connectors. I was able to make a custom set of leads so that all of my attachments now can be used with the Simpson meter. You can make a suitable set of cables for pretty much any meter. Great option!
-
Great for modular attachments
I have a great set of Probemaster modular leads with a ton of attachments, but these don't work with my Simpson meter due to its oddball connectors. I was able to make a custom set of leads so that all of my attachments now can be used with the Simpson meter. You can make a suitable set of cables for pretty much any meter. Great option!
-
Flexible. First Rate Leads.
This is my 4th set of leads from ProbeMaster. I've put all my other test leads up. These design my own are finally the test leads I needed to have for quick exchange when a different clip or hook is required. And there is at least 6 different probes to attach. Plus, probemaster is quick to respond to questions and issues. Free shipping makes them #1 easiest, cost effective, and quality leads and test probes around.