Product Description
N1008A Differential Probe 1% Accuracy (Suggested replacement for 4235)
| Features
-High Accuracy +1%
-10X/100X
-50 MHz -Safety Certified Included -Black Storage Box
-Red & Black Sprung Hooks -6 VDC Adapter |
 |
|
N1008 Specifications
| Description | N1008A（50MHz X100 X10 800Vp-p） |
| Bandwidth | DC-50MHz |
| Attenuation | 10X/ 100X |
| Accuracy | ±1% |
| In put Impedance | 4MΩ//1.3 p F each side ground |
| Input Voltage | |
| -Swing(into 50 KΩ load) | 7V |
| -Offset(typical) | ＜±5Mv |
| -（typical） | 50Ω(for using 1M ohm input system oscilloscope) |
| Power Supply | |
| Options | Power Leads |
| Length of BNC Cable | 90cm |
| Length of Input Leads | 60cm |
| Weight | 500g |
| CMRR (typical) | -80dB@60Hz,-50dB@100KHz |
| Max. input differential-mode voltage（Vp-p） | 800V@1/10080V@1/10 |
| Max. input and ground potential differential voltage（Vp-p） | 800V@1/100＆ 1/10 |
| (CMRR) | CAT II 1000V,CATⅢ 600V |
Calibration Differential Probes
The Pintech probes that we offer do not need to be Calibrated after purchasing.
At the factory they have been Mechanically zero-adjusted before shipping.
It’s less than 1mV. Mechanical zero-adjusting and will not change while using.
