Product Description
Differential Probe for Power management- Model PT-8101 ( Suggested replacement for 4233)
|
Features Applications Included |
 |
 |
Included with Probe
Black Storage
Box & 6VDC Adapter |
 |
PT-8101 Specifications
| Bandwidth | 100MHz |
| Accuracy | ±2% |
| Input Impedance | 2MΩ//2.5p F each side ground |
| Output Voltage | |
| -Swing(into 50 KΩ load) | ±7V |
| -Offset(typical) | ＜±5Mv |
| -Source Impedance（typical） | 50Ω |
| Power Requirements | |
| -Standard | 4×AA cells or 6V DC adapter |
| -Options | power leads |
| Length of BNC Lead | 90cm |
| Length of Input Leads | 60cm |
| Weigh | 500g |
| Dimension(L×W×H) | 186mm×83mm×38mm |
| Model | PT-8101 |
| Attenuation Ratio | 1:10/100 |
| CMRR(typical) | -80dB@60Hz,-50dB@100KHz |
| Differential Input Voltage（Vp-p） | 70V@1/10700V@1/100 |
| Common Mode Voltage（Vp-p） | 700V@1/10 ＆ 1/100 |
| Absolute Max .Input(Each side to ground) | CAT II 1000V,CAT Ⅲ 600V |
| Features | ·Bandwidth up to 100MHz ·Up to 1400V（Vp-p）Differential and Common Mode ·Safety Certified |
| Applications | ·Switching Power Supply Design ·Motor Drive Design ·Electronic Ballast Design ·CRT Display Design |
Calibration Differential Probes
The Pintech probes that we offer do not need to be Calibrated after purchasing.
At the factory they have been Mechanically zero-adjusted before shipping.
It’s less than 1mV. Mechanical zero-adjusting and will not change while using.
