• PT-8110 Differential Probe 1:100/1000 , 100 MHz, 1400V

    • PT-8110 Differential Probe 1:100/1000 , 100 MHz, 1400V

    $1,192.00
    (1 review) Write a Review
    Width:
    8.00 (in)
    Height:
    3.00 (in)
    Depth:
    11.00 (in)

    Product Description

    Differential Probe for Power Management- Model PT-8110 (Suggested Replacement For 4234)

    Features

    - Bandwidth up to 100 MHz
    - Input Max Voltage- 1400V
    - Attenuation 1:100 /1000
    - Accuracy 2%
    - Power supply- Battery & Power Adapter
    - Compatible with any Oscilloscope, Standard BNC interface.

     

    Included

    -Black Storage Box
    -Red & Black Sprung Hooks
    -6 VDC Adapter

    		 Product image

     

    Instruction Manual

    Optional  Accessories

    blackbox.jpg
    Included with Probe

    Black Storage
    Box
    &
    6VDC Adapter
    4210-new.jpg
     
     
     
     
     
     
     
     
     

     

     

    Model PT-8110 Specifications

     
    Bandwidth 100MHz
    Accuracy ±2%
    Input Impedance 4MΩ//2 p F each side ground
    Output Voltage
    -Swing(into 50 KΩ load) ±7V
    -Offset(typical) ＜±5Mv
    -Source Impedance（typical） 50Ω
    Power Requirements
    -Standard 4×AA cells or 6V DC adapter
    -Options power leads
    Length of BNC Lead 90cm
    Length of Input Leads 60cm
    Weigh 500g
    Dimension(L×W×H) 186mm×83mm×38mm
    Attenuation Ratio 1:100/1000
    CMRR(typical) -80dB@60Hz,-50d B@100KHz
    Differential Input Voltage（Vp-p） 140@1/100      1400@1/1000
    Common Mode Voltage（Vp-p） 1400V@1/100＆ 1/1000
    Absolute Max .Input (Each side to ground) CAT II 1000V,CAT Ⅲ 600V
     Features ·Bandwidth up to 100MHz
    ·Up to 1400Vp-p Differential and Common Mode
    ·Safety Certified
     Applications ·Switching Power Supply Design
    ·Motor Drive Design
    ·Electronic Ballast Design
    ·CRT Display Design

    Calibration Differential Probes
    The Pintech probes that we offer do not need to be Calibrated after purchasing.
    At the factory they have been Mechanically zero-adjusted before shipping.
    It’s less than 1mV. Mechanical zero-adjusting and will not change while using.

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    1 Review Hide Reviews Show Reviews

    • 5
      Awesome

      Posted by Andrew Jandert on 2023 Aug 11th

      I ordered two sets of differential probs, they work great and have a good quality feel. The shipping was very fast. Thank you for the extra reading material.