6143 BNC To BNC 10X Attenuation Cable

Product Description

BNC To BNC 10X Attenuation Cable

The 6143 is similar to a standard 10X oscilloscope probe except with BNC connections on both ends. This 10X attenuation cable  provides a more stable connection when connecting to other equipment.  This eliminates the use of a standard passive oscilloscope probe with a BNC adapter on the probe end that could come loose or break off the probe tip. The lead can be compensated to your scope with the trimmer tool included.
Made in USA- Probe Master

Specifications

• Attenuation - 10X
• Readout Option Available (RA)
• Loading- 10 pF
• Input  Impedance- 10 M-ohm
• Compensation- 8-14 pF
• Voltage-600 VOLTS D.C.

Trimmer tool included to compensate cable to instrument

Technical Data Sheet

**Readout Actuator (RA) Option

RA Option for Tektronix 465, 475, 2200,2300, 2400, 5000, 7000, 11000 series scopes.
Not all scope are listed. Check your manuals or call us and we can help you determine if you scope has this option.

The READOUT ACTUATOR (RA), permanently attached at the factory, is an option for 10X, 100X and switchable probes. These RA probes may be used with the 465, 475, 2200, 2300, 2400, 5000, 7000 and 11000 series Tektronix scopes. This option eliminates the need to divide by the attenuation ratio or remember which probe is being used. The readout actuator allows you to read your measurements directly from the oscilloscope screen.